Mitsubishi Wire EDM Machines

Next Generation Mitsubishi MV Series Wire EDM Machines

Learn About The New MV Series

Learn About Mitsubishi EDM

MV Series Wire EDM Machines

The Mitsubishi Triple-Diamond Means Performance, Quality & Support

The New Mitsubishi MV Series Wire EDM Machines deliver unmatched performance and reliability, backed by the best service and support in the industry.

Mitsubishi sets the standard for Wire EDM, with their groundbreaking Cylindrical Drive Technology – the most advanced linear drive available, and their Advanced CNC Control.

Mitsubishi is there for you with Applications Support, developing an ever expanding library of  EDM Cutting Technologies – right here in their Midwest Technology Center.

When it comes to Service, you can always count on Mitsubishi. They still support the first machine sold.

  • Revolutionary Machine Construction
  • Cylindrical Drive System
  • New Power Supply
  • New Head Design
  • Increased Auto-Threader Capabilities
  • 60% Less Wire Consumption
Cylindrical Drive Technology - Mitsubishi Wire EDM Machines

Mitsubishi’s Cylindrical Drive System creates a non-contact design using the full 360 degrees of magnetic flux. This design delivers no wear, no cogging (inherent in flat plate systems), and no backlash – all for better energy-efficiency, accuracy, and speed.

MV1200-S ADVANCE TYPE M800

Machine Travels: 15.7 x 11.8 x 8.7 (xyz)


Take your small parts manufacturing business to new levels with the new MV1200-S M800. This machine features improved machine construction, auto-threading, internal machine communication, power supply technology and operating cost reduction.


Maximum Workpiece Dimensions: W x D x H in (mm) 31.9 x 27.6 x 8.5 (810 x 700 x 215)
Max. Submerged Workpiece Weight: lb (kg) 1102 (500)
Table Dimensions: in (mm) 25.2 x 17.7 (640 x 450)
U/V Travels (from center): in (mm) ±2.4 x ±2.4 (±60 x ±60)
Taper Angle @ Thickness: in (mm) 15 deg.@ 8.0 (15 deg.@ 200)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 1.8″ 45mm (No AT Possible)

MV1200-R ADVANCE PLUS M800

Machine Travels: 15.7 x 11.8 x 8.7 (xyz)


Introducing the MV1200-R Advance Plus M800. The new machine features the Mitsubishi M800 series control with a 19-inch cell phone like touchscreen for easier user interface. Mitsubishi is dedicated to constant innovation and strives to build only the highest quality machines.


Maximum Workpiece Dimensions: W x D x H in (mm) 31.9 x 27.6 x 8.5 (810 x 700 x 215)
Max. Submerged Workpiece Weight: lb (kg) 1102 (500)
Table Dimensions: in (mm) 25.2 x 21.3 (640 x 540)
U/V Travels (from center): in (mm) ±2.4 x ±2.4 (±60 x ±60)
Taper Angle @ Thickness: in (mm) 15 deg.@ 8.0 (15 deg.@ 200)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 1.8″ 45mm (No AT Possible)

MV2400-R ADVANCE PLUS M800

Mitsubishi Wire EDM

Machine Travels: 23.6 x 15.7 x 12.2 (xyz)


The new innovative MV-R series features improvements in machine construction, auto-threading, internal machine communication, power supply technology and operating costs. For easier user interface, the MV2400-R Advance Plus M800 utilizes the new Mitsubishi M800 series control with a 19-inch cell phone like touchscreen.


Maximum Workpiece Dimensions: W x D x H in (mm) 41.3 x 32.3 x 12.0 (1050 x 820 x 305)
Max. Submerged Workpiece Weight: lb (kg) 3307 (1500)
Table Dimensions: in (mm) 33.0 x 25.2 (840 x 640)
U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm) 15 deg.@ 10.2 (15 deg.@ 260)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4″ 60mm (No AT Possible)

MV2400-S ADVANCE TYPE M800

MV2400-S

Machine Travels: 23.6 x 15.7 x 12.2 (xyz)


MV2400-S Advance Type M800 is a part of the most innovative and user-friendly wire EDM machine series on the market. The MV2400-S features our continued dedication to high precision and innovative technology with the highly reliable non-contact Cylindrical Drive System on the X & Y axis drives.


Maximum Workpiece Dimensions: W x D x H in (mm) 41.3 x 32.3 x 12.0 (1050 x 820 x 305)
Max. Submerged Workpiece Weight: lb (kg) 3307 (1500)
Table Dimensions: in (mm) 33.0 x 22.0 (840 x 560)
U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm) 15 deg.@ 10.2 (15 deg.@ 260)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4″ 60mm (No AT Possible)

MV4800-S ADVANCE TYPE M800

Mitsubishi MV4800-S M800

Machine Travels: 31.5 x 23.6 x 20.1 (xyz)


MV4800-S Advance m800 is now capable of submerged cutting up to 20.0 inches deep with full support of the best auto-threading system on the market today. With an annealing length of over 27 inches, this system is capable of threading the maximum workpiece height both at the start point and through the gap if needed for a broken wire recovery.


Maximum Workpiece Dimensions: W x D x H in (mm) 53.1 x 43.3 x 20.0 (1350 x 1100 x 500)
Max. Submerged Workpiece Weight: lb (kg) 6600 (3000)
Table Dimensions: in (mm) 45.3 x 38.4 (1150 x 975)
U/V Travels (from center): in (mm) ±4.0 x ±4.0 (±100 x ±100)
Taper Angle @ Thickness: in (mm) 15 deg.@ 14.3 (15 deg.@ 365)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4″ (No AT Possible)

FA-V Series Wire EDM Machines

FA40V ADVANCE

FA40V

Machine Travels: 39.4 x 31.5 x 15.7 (xyz)


With machine performance up to 36 square inches per hour in hardened D2 steel, the FA40V Advance is one of the world’s fastest, large workpiece, high-accuracy wire EDM machines. The FA40V Advance features the new M700 series control with a 15-inch touchscreen, providing easy user interface.


Maximum Workpiece Dimensions: W x D x H in (mm) 61.0 x 51.2 x 15.6 (1550 x 1300 x 395)
Max. Submerged Workpiece Weight: lb (kg) 8818 (4000)
Table Dimensions: in (mm) 53.5 x 46.2 (1360 x 1175)
U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm) 15 deg.@ 10.5 (15 deg.@ 265)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4″ (No AT Possible)

FA50V ADVANCE

FA50V

Machine Travels: 51.2 x 39.4 x 15.7 (xyz)


With machine performance up to 36 sq”/hr in hardened D2 steel, the FA50V Advance is one of the world’s fastest high-accuracy wire-cut EDM machines. The FA Advance Series features the new M700 series control with 15″ touch screen, providing easy user interface and many features that will Advance your EDM machining.


Maximum Workpiece Dimensions: W x D x H in (mm) 78.7 x 63.0 x 15.6 (2000 x 1600 x 395)
Max. Submerged Workpiece Weight: lb (kg) 8818 (4000)
Table Dimensions: in (mm) 65.3 x 54.1 (1650 x 1380)
U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm) 15 deg.@ 10.5 (15 deg.@ 265)
Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4″ (No AT Possible)
Loading...