Innovate Technologies http://innovatetec.com Innovate. Compete. Win. Mon, 06 May 2013 13:48:13 +0000 en hourly 1 http://wordpress.org/?v= Used Wire EDM Machine – 2012 Mitsubishi FA10S Advancehttp://innovatetec.com/used-wire-edm-machine-2012-mitsubishi-fa10s-advance/?utm_source=rss&utm_medium=rss&utm_campaign=used-wire-edm-machine-2012-mitsubishi-fa10s-advance http://innovatetec.com/used-wire-edm-machine-2012-mitsubishi-fa10s-advance/#comments Sat, 20 Apr 2013 11:56:00 +0000 Innovate http://innovatetec.com/sold-used-wire-edm-machine-mitsubishi-fx10-copy/ Mitsubishi FA10S Advance

Year: 2012

Condition:

Like New Condition Only 670 Hours Of Operation Currently Under Power Ready For Inspection

Price: $89,000 USD – Or Best Offer

 

This used wire EDM machine won’t last long. Used Mitsubishi Wire EDM machines are in great [...]]]> Used Wire EDM Machine For Sale - 2012 Mitsubishi FA10S Advance

Used Wired EDM Machine For Sale

Mitsubishi FA10S Advance

Year: 2012

Condition:

  • Like New Condition
  • Only 670 Hours Of Operation
  • Currently Under Power
  • Ready For Inspection

Price: $89,000 USD – Or Best Offer

 

This used wire EDM machine won’t last long. Used Mitsubishi Wire EDM machines are in great demand.

 

Call for details today.

 

 Details:

Max. Submerged Workpiece Dimensions31.5 x 23.6 x 8.5800 x 600 x 215
Max. Submerged Workpiece Weight1105 lb.500 kg
Table Dimensions23.2 x 20.2590 x 510
Machining Range X-Y13.8 x 9.8350 x 250
Max. Z-Axis Height8.6220
U-V Axis Travel (from center)±1.25±32
Taper Angle @ Thickness15 deg.@ 4.015 deg.@ 100
Wide Angle Taper (Optional Guides Required)45 deg. (No AT Possible)
Minimum Drive Unit / Resolution0.00001 / 2 millionths0.0001 / 0.05µm
User Program Storage [Hard Disk Size]1G [40 GB]
Table Rapid Feed Speed51.2 “/min1300 mm/min
Wire Diameter Possible0.004~0.0120.1~0.3
Minimum Start Hole Diameter0.020.5
Max. Wire Spool size STD [optional]22 lb. [44 lb.]10 kg [20 kg]
Filters / Type2 / Paper2 / Paper
Filter Tank Capacity116 gal440 L
Machine System Dimensions77.7 x 81.61975 x 1667
Machine Installed Height802030
Machine System Weight5690 lb2580 kg
Power Requirements [KVA]200-230V [13.5] Built in AVR
Compressed Air Requirements2.7 cu.ft./min. @ 71~100 psi
Additional Features:

Submerged Machining to 8.5″ Deep
Automatic Fluid Level Control
Vertical Movement Machine Tank door
Full 4-Sided Work Table
Fine Grain “Dianite” Casting Material
Compound Moving Table Design
Windows XP Operating System
Power Master Control (Automatically Adjusts Power Settings)
DC-Servo (Closed Loop) Torque Control Wire Tensioning System
Direct Drive Zero Backlash Ball Screw Couplings
Linear Motion Guide Ways
Digital 500 Watt AC Servo Drive System
All-Axes Absolute Control System
Linear Glass Scale Feedback (X-Y Axes)
Optical Rotary Encoder Feedback (U-V-Z-Axes)
Auto-Threading with Scrap Wire Processor (Chopper)
Inverter Controlled 16-Step Programmable Flushing
Full Time AE (Anti-Electrolysis) Power Supply Protection
Dielectric Fluid Chiller Standard
Auto-Oiler Lubrication System
Full 2-yr. Warranty with Triple Diamond Partnership Program
Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
Auto-Oiler Lubrication System
Used Wire EDM Machine For Sale - 2012 Mitsubishi FA10S Advance image003 image005 image007 image009 ]]> http://innovatetec.com/used-wire-edm-machine-2012-mitsubishi-fa10s-advance/feed/ 0 Used EDM Hole Popper – 2008 Mitsubishi ED2000M EDM Drillhttp://innovatetec.com/used-edm-hole-popper-2008-mitsubishi-ed2000m-edm-drill/?utm_source=rss&utm_medium=rss&utm_campaign=used-edm-hole-popper-2008-mitsubishi-ed2000m-edm-drill http://innovatetec.com/used-edm-hole-popper-2008-mitsubishi-ed2000m-edm-drill/#comments Sat, 20 Apr 2013 11:55:35 +0000 Innovate http://innovatetec.com/?p=2315 Mitsubishi ED2000M Manual EDM Drill

Year: 2008

Condition:

Good Operating Condition Currently Under Power Ready For Inspection

Price: $15,750 USD

This used EDM hole popper won’t last long.

Used Mitsubishi EDM drilling machines are in demand.

Call for details today.

  Details:

[...]]]>  EDM Hole Popper - Mitsubishi Model ED2000M

Used EDM Hole Popper For Sale

Mitsubishi ED2000M Manual EDM Drill

Year: 2008

Condition:

  • Good Operating Condition
  • Currently Under Power
  • Ready For Inspection

Price: $15,750 USD

This used EDM hole popper won’t last long.

Used Mitsubishi EDM drilling machines are in demand.

Call for details today.

 Details:

InchMetric
Machining Range X-Y-Z11.8 x 7.8 x5.9300 x 200 x 150
W-Axis Servo Travel (electrode travel)13.6345
Max. Servo W-Axis Feed Rate31.5″/min800mm/min
Electrode Diameter Range.012 ~ .1200.3 ~ 3.0
Max. Workpiece Dimensions18.9 x 8.3 x 6.1480 x 210 x 155
Max. Workpiece Weight440 lb.200 kg
Table Dimensions W-D18.9 x 8.2480 x 210
Max. Electrode Length16400
Fluid Capacity5 gal.19 L
Machine System Dimensions W x D39.3 x 46.61000 x 1020
Machine Installed Height81.52070
Machine System Weight1433 lb.650 kg
Control OperationPush Botton Touch Screen
Power Supply Peak Current30 AMPs
Power Requirements [KVA]200/220 VAC ±5% [2.5]

 Additional Features:

New Low-Energy consumption-type generator provides high-speed operation with extremely low electrode wear
Patented low-voltage power supply produces no “bullet nosing” of the electrode providing cleaner hole break throughs
Burn a 1.0 mm electrode though 2″ thick D2 in 70 seconds
Burn over 14 holes through 2″ D2 with one electrode
The control uses a full color touch-screen for easy operation
Optional fluid tank / filter system extends fluid life
Electrode chuck ranging from 0.3 ~ 3.0 mm diameter standard
Optional Tilt/Rotary Indexing table increases productivity in many hole drilling applications


 

 

 

]]> http://innovatetec.com/used-edm-hole-popper-2008-mitsubishi-ed2000m-edm-drill/feed/ 0 Used Wire EDM Machine – 1987 Fanuc WOhttp://innovatetec.com/used-wire-edm-machine-1987-fanuc-wo/?utm_source=rss&utm_medium=rss&utm_campaign=used-wire-edm-machine-1987-fanuc-wo http://innovatetec.com/used-wire-edm-machine-1987-fanuc-wo/#comments Sat, 20 Apr 2013 11:28:11 +0000 Innovate http://innovatetec.com/?p=2305 Fanuc WO -

Year: 1987

Condition:

Good Operating Condition Currently Under Power Ready For Inspection

Price: $4,000 USD – Or Best Offer

This used wire EDM machine is a workhorse.

A great way to add wire EDM capability, or extra capacity for a minimal [...]]]>

Used Wire EDM Machine For Sale

Fanuc WO -

Year: 1987

Condition:

  • Good Operating Condition
  • Currently Under Power
  • Ready For Inspection

Price: $4,000 USD – Or Best Offer

This used wire EDM machine is a workhorse.

A great way to add wire EDM capability, or extra capacity for a minimal investment.

Call for details today.

 Details: 

  • S/N =7W0049
  • Tape cut
  • Table travel   X=7.7”     Y=13.6    Z=5.0
  • Can cut taper

 Additional Features:
 SAM_1168 SAM_1169 SAM_1170 SAM_1171 SAM_1172

 

]]> http://innovatetec.com/used-wire-edm-machine-1987-fanuc-wo/feed/ 0 SOLD: Used Wire EDM Machine – 1997 Mitsubishi FX10http://innovatetec.com/sold-used-wire-edm-machine-1997-mitsubishi-fx10/?utm_source=rss&utm_medium=rss&utm_campaign=sold-used-wire-edm-machine-1997-mitsubishi-fx10 http://innovatetec.com/sold-used-wire-edm-machine-1997-mitsubishi-fx10/#comments Fri, 12 Apr 2013 20:38:25 +0000 Innovate http://innovatetec.com/sold-used-wire-edm-machine-mitsubishi-fx10-copy/ Mitsubishi FX10

Year: 1997

Condition:

Outstanding Condition Very Well Maintained Very Clean Environment Currently Under Power Ready For Inspection

Price: $28,000 USD

 

This used wire EDM machine won’t last long.

Used Mitsubishi wire EDM machines are in great demand.

Call for details today. Details:

Control: [...]]]> sold used wire edm machineUsed Wire EDM Machine For Sale - 1997 Mitsubishi FX10

Used Wired EDM Machine For Sale

Mitsubishi FX10

Year: 1997

Condition:

  • Outstanding Condition
  • Very Well Maintained
  • Very Clean Environment
  • Currently Under Power
  • Ready For Inspection


Price: $28,000 USD

 

This used wire EDM machine won’t last long.

Used Mitsubishi wire EDM machines are in great demand.

Call for details today. Details:

  • Control: Mitsubishi 
  • Maximum Workpiece Weight: 1,168 lbs 
  • Maximum Workpiece Size: 31.49″ x 22.63″ x 8.66″ 
  • Machining Travels ( X x Y x Z ): 13.77″ x 9.84″ x 8.66″ 
  • Table Size: 24.80″ x 20.86″ 
  • Taper Capacity: 15 Degrees +/- in 4″ 
  • Maximum Amperage: 40 Amps 
  • Approximate Dimensions: 92″ x 91″ x 90″ 
  • Approximate Machine Weight: 4070 Lbs
Equipped With:

  • AF3 Autothreader 
  • Submerged Cutting 
  • Advance Hand Pendant 
  • All Available Manuals and Accessories

 

]]> http://innovatetec.com/sold-used-wire-edm-machine-1997-mitsubishi-fx10/feed/ 0 Special Pricing On System 3R Tooling & You Can Write It Off!http://innovatetec.com/special-pricing-on-system-3r-tooling-you-can-write-it-off/?utm_source=rss&utm_medium=rss&utm_campaign=special-pricing-on-system-3r-tooling-you-can-write-it-off http://innovatetec.com/special-pricing-on-system-3r-tooling-you-can-write-it-off/#comments Tue, 20 Nov 2012 21:00:02 +0000 Innovate http://innovatetec.com/?p=2207 In Illinois, Call Joe Talarczyk : 630-587-4220

In Indiana, Call Mike Altergott : 630-347-6571

Don’t Miss Out On The Section 179 Tax Benefits

They’re Due To Expire December 31, 2012!

You can get these tax benefits for your tooling purchases.

And remember, these benefits also apply to new & used machinery purchases.

[...]]]>  System 3R Tooling Sale

In Illinois, Call Joe Talarczyk : 630-587-4220

In Indiana, Call Mike Altergott : 630-347-6571

Section 179 Tax DeductionDon’t Miss Out On The Section 179 Tax Benefits

They’re Due To Expire December 31, 2012!

You can get these tax benefits for your tooling purchases.

And remember, these benefits also apply to new & used machinery purchases.

Questions? We’ve Got Answers…877-250-1700

Of course, you should consult your accountant about Section 179 for your business.

Call For Special Promotional Pricing On System 3R Tooling

Or Vsit Us On The Web: www.innovatetec.com

Call Innovate Technologies, Inc - 877-250-1770

Innovate Technologies Inc - Mitsubishi EDM & Waterjet DealerHeadquarters:Indiana Office:
Innovate Technologies, Inc.
761 N. 17th St., Unit #5
St. Charles, IL 60174
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com		Innovate Technologies, Inc.
3830 Hanna Circle, Suite D
Indianapolis, IN 46241
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com

 

]]> http://innovatetec.com/special-pricing-on-system-3r-tooling-you-can-write-it-off/feed/ 0 How Does A 50% Reduction In Wire EDM Operating Costs Sound?http://innovatetec.com/50-percent-reduction-in-wire-edm-operating-costs/?utm_source=rss&utm_medium=rss&utm_campaign=50-percent-reduction-in-wire-edm-operating-costs http://innovatetec.com/50-percent-reduction-in-wire-edm-operating-costs/#comments Wed, 14 Nov 2012 14:16:06 +0000 Innovate http://innovatetec.com/?p=1879

Faster Machining…Improved Accuracy…And A 50% Reduction In Wire EDM Operating Costs! 

The MV Series will change the way you Wire EDM forever… Let us prove it!

These machines will give you the edge you need to beat the competition… [...]]]>  Reduction In Wire EDM Operating CostsFinally you can get everything you want in one machine…

Faster Machining…Improved Accuracy…And A 50% Reduction In Wire EDM Operating Costs! 

The MV Series will change the way you Wire EDM forever…
Let us prove it!

These machines will give you the edge you need to beat the competition…
Give a call today, and let us explain how!

CALL: 877-250-1770 

Learn More About The MV Series - Download A Brochure

  Section 179 Tax Deduction
Don’t Miss Out On The Section 179 Tax Deduction
For Machinery Purchases
Ending December 31, 2012  Section 179 Tax DeductionSection 179 of the IRS tax code allows businesses to deduct the full purchase price of machines purchased or financed during the tax year. It’s an incentive created by the U.S. Government to encourage businesses to buy equipment and invest in themselves.In order to qualify for the Section 179 Deduction, the equipment must be purchased or leased and put into service by December 31, 2012.2012 Deduction Limit = $139,000
This is good on new and used equipment, as well as off-the-shelf software.

2012 Limit on equipment purchases = $560,000 
This is the maximum amount that can be spent on equipment before the Section 179 Deduction available to your company begins to be reduced.

Bonus Depreciation = 50% 
This is taken after the $560k limit in capital equipment purchases is reached. Note: Bonus Depreciation is available for new equipment only. Bonus Depreciation can also be taken by businesses that will have net operating losses in 2012.

\The above is an overall, “simplified” view of the Section 179 Deduction for 2012. For more details on limits and qualifying equipment, as well as Section 179 Qualified Financing, visit the Section 179 website. The Section 179 website has a Section 179 Calculator and gives an examples of how much your company can save using Section 179.Here is an example of Section 179 at work:

...

Questions? We’ve Got Answers…877-250-1700 Upgrade Your Machines
Are You Ready To Upgrade Your Technology And Your Productivity?
Innovate Technologies Can Help You Sell Your Outdated Machines!
Sell EDM MachinesMany machinery dealers will say that they offer you top dollar for your equipment. What that usually means is that they can offer you top WHOLESALE dollar to purchase your machine(s) for their resale inventory.We can help you get the maximum value with minimum effort on your part.Innovate can help you sell your machine one of three ways:

  • Exclusive Listing
  • Consignment
  • Outright Purchase

Whatever your choice, we can help you get the maximum value for the minimum effort. Once you determine your objectives (get the most money, free up space, or get wholesale value immediately), you can put our experience to work for you to achieve your goal

Exclusive Listing

We can get you the maximum return on your investment by running an exclusive listing on our website, our eBay store, and through bulk email to thousands of end-user manufacturing facilities throughout the midwest. This gives you the following advantages:You retain ownership of the machine(s) until sold:We advertise and market your machine to end users who are ready and willing to pay retail (fair market value); you do not pay anything up front for this service.Additionally, we market to other dealers who might have customers already looking for the machine(s), which they can have emailed or faxed to them as well.We offer potential customers the convenience of detailed photos and descriptions of the machine(s), which they can have emailed or faxed to them as well.Our established presence in the used machinery marketplace lets customers know that we have knowledge of the machines we are selling for you and that we are able to promptly and professionally handle all inquires about your machine(s).

Consignment

If you need to get the machine(s) out of your facilities as soon as possible, but do not want to settle for selling them to a dealer at wholesale cost, we can store your machine rent-free at our facility until it is sold. This gives you all of the advantages of an exclusive listing, with the exception of a higher commission to be deducted at the time of the sale. Although the return would not be as much as if we sell the machine(s) from out of our facility, you would be able to get more money at the time of sale than you could ever hope to get from a dealer buying at wholesale for resale stock.

Outright Purchase

If you need to generate income from your surplus machinery as soon as possible, we are always looking for quality machines to buy for our resale inventory. Our offers will be competitive.

 

Call for a free demonstration or consultation. Or visit us on the web: www.innovatetec.com

Call Innovate Technologies, Inc - 877-250-1770

Innovate Technologies Inc - Mitsubishi EDM & Waterjet DealerHeadquarters:Indiana Office:
Innovate Technologies, Inc.
761 N. 17th St., Unit #5
St. Charles, IL 60174
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com		Innovate Technologies, Inc.
3830 Hanna Circle, Suite D
Indianapolis, IN 46241
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com

 

]]> http://innovatetec.com/50-percent-reduction-in-wire-edm-operating-costs/feed/ 0 FOR SALE: Used Wire EDM Machine – Charmilles Robofil 310http://innovatetec.com/for-sale-used-wire-edm-machine-charmilles-robofil-310/?utm_source=rss&utm_medium=rss&utm_campaign=for-sale-used-wire-edm-machine-charmilles-robofil-310 http://innovatetec.com/for-sale-used-wire-edm-machine-charmilles-robofil-310/#comments Tue, 30 Oct 2012 13:52:17 +0000 Innovate http://innovatetec.com/?p=2103 Charmilles CNC Control Auto Wire Threading 14″ Color Graphics Monitor Remote Hand Pendant Filtration System

Currently Under Power – Ready For Inspection

Price: $20,000 USD – OBO

This used wire EDM machine is in good condition. These machines are in demand, so this one won’t last [...]]]> Used EDM Machine - Charmilles 310Used Wire EDM Machine1994 Charmilles Robofil 310Details:

  • Charmilles CNC Control
  • Auto Wire Threading
  • 14″ Color Graphics Monitor
  • Remote Hand Pendant
  • Filtration System

Currently Under Power – Ready For Inspection

Price: $20,000 USD – OBO

This used wire EDM machine is in good condition. These machines are in demand, so this one won’t last long.

Call today for more information:

877-250-1770

Specifications:

Machining Stroke (X-Y-Z) ……15.7″ x 9.8″ x 15.7″
Machining Stroke (U, V) ……15.7″ x 9.8″
Taper Capacity ……0 to 30 Degrees
 Maximum Workpiece Size ……33.5″ x 19.7″ x 15.7″
 Maximum Workpiece Weight ……2,207 lbs
 Wire Diameter Capability ……004″ to .012″
 Wire Diameter Guides Included ……0.010″
 Approximate Overall Dimensions ……71″ L-R x 63″ F-B x 88″ H
 Approximate Machine Weight ……5,511 lbs

 

 

 Used Wire EDM Machine - Charmilles Robofil 310

Used Wire EDM Machine - Charmilles Robofil 310 IMG_0385 Used EDM Machine - Charmilles 310 IMG_0387 IMG_0388 IMG_0389 IMG_0390 IMG_0391 IMG_0392

]]> http://innovatetec.com/for-sale-used-wire-edm-machine-charmilles-robofil-310/feed/ 0 SOLD – Used Wire EDM Machine – Mitsubishi FX10http://innovatetec.com/for-sale-used-wire-edm-machine-mitsubishi-fx10/?utm_source=rss&utm_medium=rss&utm_campaign=for-sale-used-wire-edm-machine-mitsubishi-fx10 http://innovatetec.com/for-sale-used-wire-edm-machine-mitsubishi-fx10/#comments Sat, 29 Sep 2012 19:09:45 +0000 Innovate http://innovatetec.com/?p=2073 Mitsubishi FX10

Year: 1996

Condition:

Good Condition Currently Under Power Ready For Inspection

Details:

Control: Mitsubishi  Maximum Workpiece Weight: 1,168 lbs  Maximum Workpiece Size: 31.49″ x 22.63″ x 8.66″  Machining Travels ( X x Y x Z ): 13.77″ x 9.84″ x 8.66″  Table Size: 24.80″ x 20.86″  [...]]]> sold used wire edm machineUsed wire edm machine - Mitsubishi FX10

SOLD: Used Wired EDM Machine

Mitsubishi FX10

Year: 1996

Condition:

  • Good Condition
  • Currently Under Power
  • Ready For Inspection

Details:

  • Control: Mitsubishi 
  • Maximum Workpiece Weight: 1,168 lbs 
  • Maximum Workpiece Size: 31.49″ x 22.63″ x 8.66″ 
  • Machining Travels ( X x Y x Z ): 13.77″ x 9.84″ x 8.66″ 
  • Table Size: 24.80″ x 20.86″ 
  • Taper Capacity: 15 Degrees +/- in 4″ 
  • Maximum Amperage: 40 Amps 
  • Approximate Dimensions: 92″ x 91″ x 90″ 
  • Approximate Machine Weight: 4070 Lbs 

Equipped with:

  • AF3 Autothreader 
  • Submerged Cutting 
  • Advance Hand Pendant 
  • Electric Chiller
  • Wire Chopper
  • All Available Manuals and Accessories 

Price: $20,000 USD – Or Best Offer

 

  Used wire edm machine - Mitsubishi FX10 Used wire edm machine - Mitsubishi FX10 Used wire edm machine - Mitsubishi FX10 Used wire edm machine - Mitsubishi FX10 Used wire edm machine - Mitsubishi FX10 ]]> http://innovatetec.com/for-sale-used-wire-edm-machine-mitsubishi-fx10/feed/ 0 SOLD – Used Sinker EDM Machine – 2002 Charmilles Roboform 55Phttp://innovatetec.com/for-sale-used-sinker-edm-machine-2002-charmilles-roboform-55p/?utm_source=rss&utm_medium=rss&utm_campaign=for-sale-used-sinker-edm-machine-2002-charmilles-roboform-55p http://innovatetec.com/for-sale-used-sinker-edm-machine-2002-charmilles-roboform-55p/#comments Fri, 28 Sep 2012 15:04:42 +0000 Innovate http://innovatetec.com/?p=2055 2002 Charmilles Roboform 55P

Details:

C-Axis with Hirschman chuck 6 position tool changer CO2 fire extinguisher

sold used wire edm machine

used sinker edm machine

Used Sinker EDM Machine

2002 Charmilles Roboform 55P

Details:

  • C-Axis with Hirschman chuck
  • 6 position tool changer
  • CO2 fire extinguisher

Price: $52,700.00 USD – OBO

Currently Under Power – Ready For Inspection

This used sinker EDM machine is in great condition. These machines are in demand, so this one won’t last long.

Call today for more information: 877-250-1770

used sinker edm machine 2 used sinker edm machine 3 used sinker edm machine 4 used sinker edm machine 5 used sinker edm machine 6 used sinker edm machine ]]> http://innovatetec.com/for-sale-used-sinker-edm-machine-2002-charmilles-roboform-55p/feed/ 0 Manufacturing Will Lead Economic Recoveryhttp://innovatetec.com/manufacturing-will-lead-economic-recovery/?utm_source=rss&utm_medium=rss&utm_campaign=manufacturing-will-lead-economic-recovery http://innovatetec.com/manufacturing-will-lead-economic-recovery/#comments Wed, 26 Sep 2012 21:29:09 +0000 Innovate http://innovatetec.com/?p=2018 According to analysis by the Boston Consulting Group, manufacturing and supporting jobs will continue to grow by 5 million over the next decade. The firm previously projected a gain of 2 to 3 million jobs by [...]]]> This video from Yahoo Finance contains good news for American Manufacturing.

According to analysis by the Boston Consulting Group, manufacturing and supporting jobs will continue to grow by 5 million over the next decade. The firm previously projected a gain of 2 to 3 million jobs by 2020.

]]> http://innovatetec.com/manufacturing-will-lead-economic-recovery/feed/ 0