 |
Used Wired EDM Machine For Sale
Mitsubishi FA10S Advance
Year: 2012
Condition:
- Like New Condition
- Only 670 Hours Of Operation
- Currently Under Power
- Ready For Inspection
Price: $89,000 USD – Or Best Offer
This used wire EDM machine won’t last long. Used Mitsubishi Wire EDM machines are in great demand.
Call for details today.
|
Details:
| Max. Submerged Workpiece Dimensions |
31.5 x 23.6 x 8.5 |
800 x 600 x 215 |
| Max. Submerged Workpiece Weight |
1105 lb. |
500 kg |
| Table Dimensions |
23.2 x 20.2 |
590 x 510 |
| Machining Range X-Y |
13.8 x 9.8 |
350 x 250 |
| Max. Z-Axis Height |
8.6 |
220 |
| U-V Axis Travel (from center) |
±1.25 |
±32 |
| Taper Angle @ Thickness |
15 deg.@ 4.0 |
15 deg.@ 100 |
| Wide Angle Taper (Optional Guides Required) |
45 deg. (No AT Possible) |
| Minimum Drive Unit / Resolution |
0.00001 / 2 millionths |
0.0001 / 0.05µm |
| User Program Storage [Hard Disk Size] |
1G [40 GB] |
| Table Rapid Feed Speed |
51.2 “/min |
1300 mm/min |
| Wire Diameter Possible |
0.004~0.012 |
0.1~0.3 |
| Minimum Start Hole Diameter |
0.02 |
0.5 |
| Max. Wire Spool size STD [optional] |
22 lb. [44 lb.] |
10 kg [20 kg] |
| Filters / Type |
2 / Paper |
2 / Paper |
| Filter Tank Capacity |
116 gal |
440 L |
| Machine System Dimensions |
77.7 x 81.6 |
1975 x 1667 |
| Machine Installed Height |
80 |
2030 |
| Machine System Weight |
5690 lb |
2580 kg |
| Power Requirements [KVA] |
200-230V [13.5] Built in AVR |
| Compressed Air Requirements |
2.7 cu.ft./min. @ 71~100 psi |
|
Additional Features:
| Submerged Machining to 8.5″ Deep |
|
| Automatic Fluid Level Control |
| Vertical Movement Machine Tank door |
| Full 4-Sided Work Table |
| Fine Grain “Dianite” Casting Material |
| Compound Moving Table Design |
| Windows XP Operating System |
| Power Master Control (Automatically Adjusts Power Settings) |
| DC-Servo (Closed Loop) Torque Control Wire Tensioning System |
| Direct Drive Zero Backlash Ball Screw Couplings |
| Linear Motion Guide Ways |
| Digital 500 Watt AC Servo Drive System |
| All-Axes Absolute Control System |
| Linear Glass Scale Feedback (X-Y Axes) |
| Optical Rotary Encoder Feedback (U-V-Z-Axes) |
| Auto-Threading with Scrap Wire Processor (Chopper) |
| Inverter Controlled 16-Step Programmable Flushing |
| Full Time AE (Anti-Electrolysis) Power Supply Protection |
| Dielectric Fluid Chiller Standard |
| Auto-Oiler Lubrication System |
| Full 2-yr. Warranty with Triple Diamond Partnership Program |
| Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard |
| Auto-Oiler Lubrication System |
|
 |
Used EDM Hole Popper For Sale
Mitsubishi ED2000M Manual EDM Drill
Year: 2008
Condition:
- Good Operating Condition
- Currently Under Power
- Ready For Inspection
Price: $15,750 USD
This used EDM hole popper won’t last long.
Used Mitsubishi EDM drilling machines are in demand.
Call for details today.
|
Details:
|
Inch |
Metric |
| Machining Range X-Y-Z |
11.8 x 7.8 x5.9 |
300 x 200 x 150 |
| W-Axis Servo Travel (electrode travel) |
13.6 |
345 |
| Max. Servo W-Axis Feed Rate |
31.5″/min |
800mm/min |
| Electrode Diameter Range |
.012 ~ .120 |
0.3 ~ 3.0 |
| Max. Workpiece Dimensions |
18.9 x 8.3 x 6.1 |
480 x 210 x 155 |
| Max. Workpiece Weight |
440 lb. |
200 kg |
| Table Dimensions W-D |
18.9 x 8.2 |
480 x 210 |
| Max. Electrode Length |
16 |
400 |
| Fluid Capacity |
5 gal. |
19 L |
| Machine System Dimensions W x D |
39.3 x 46.6 |
1000 x 1020 |
| Machine Installed Height |
81.5 |
2070 |
| Machine System Weight |
1433 lb. |
650 kg |
| Control Operation |
Push Botton Touch Screen |
| Power Supply Peak Current |
30 AMPs |
| Power Requirements [KVA] |
200/220 VAC ±5% [2.5] |
|
Additional Features:
| New Low-Energy consumption-type generator provides high-speed operation with extremely low electrode wear |
|
| Patented low-voltage power supply produces no “bullet nosing” of the electrode providing cleaner hole break throughs |
| Burn a 1.0 mm electrode though 2″ thick D2 in 70 seconds |
| Burn over 14 holes through 2″ D2 with one electrode |
| The control uses a full color touch-screen for easy operation |
| Optional fluid tank / filter system extends fluid life |
| Electrode chuck ranging from 0.3 ~ 3.0 mm diameter standard |
| Optional Tilt/Rotary Indexing table increases productivity in many hole drilling applications |
|
 |
Used Wire EDM Machine For Sale
Fanuc WO -
Year: 1987
Condition:
- Good Operating Condition
- Currently Under Power
- Ready For Inspection
Price: $4,000 USD – Or Best Offer
This used wire EDM machine is a workhorse.
A great way to add wire EDM capability, or extra capacity for a minimal investment.
Call for details today.
|
Details:
- S/N =7W0049
- Tape cut
- Table travel X=7.7” Y=13.6 Z=5.0
- Can cut taper
|
Additional Features:
|
 |
| Finally you can get everything you want in one machine…
Faster Machining…Improved Accuracy…And A 50% Reduction In Wire EDM Operating Costs!
The MV Series will change the way you Wire EDM forever…
Let us prove it!
These machines will give you the edge you need to beat the competition…
Give a call today, and let us explain how!
CALL: 877-250-1770
Learn More About The MV Series - Download A Brochure
|
Don’t Miss Out On The Section 179 Tax Deduction
For Machinery Purchases
Ending December 31, 2012 |
 |
Section 179 of the IRS tax code allows businesses to deduct the full purchase price of machines purchased or financed during the tax year. It’s an incentive created by the U.S. Government to encourage businesses to buy equipment and invest in themselves.In order to qualify for the Section 179 Deduction, the equipment must be purchased or leased and put into service by December 31, 2012.2012 Deduction Limit = $139,000
This is good on new and used equipment, as well as off-the-shelf software.
2012 Limit on equipment purchases = $560,000
This is the maximum amount that can be spent on equipment before the Section 179 Deduction available to your company begins to be reduced.
Bonus Depreciation = 50%
This is taken after the $560k limit in capital equipment purchases is reached. Note: Bonus Depreciation is available for new equipment only. Bonus Depreciation can also be taken by businesses that will have net operating losses in 2012.
\The above is an overall, “simplified” view of the Section 179 Deduction for 2012. For more details on limits and qualifying equipment, as well as Section 179 Qualified Financing, visit the Section 179 website. The Section 179 website has a Section 179 Calculator and gives an examples of how much your company can save using Section 179.Here is an example of Section 179 at work:
Questions? We’ve Got Answers…877-250-1700 |
Are You Ready To Upgrade Your Technology And Your Productivity?
Innovate Technologies Can Help You Sell Your Outdated Machines!
|
 |
Many machinery dealers will say that they offer you top dollar for your equipment. What that usually means is that they can offer you top WHOLESALE dollar to purchase your machine(s) for their resale inventory.We can help you get the maximum value with minimum effort on your part.Innovate can help you sell your machine one of three ways:
- Exclusive Listing
- Consignment
- Outright Purchase
Whatever your choice, we can help you get the maximum value for the minimum effort. Once you determine your objectives (get the most money, free up space, or get wholesale value immediately), you can put our experience to work for you to achieve your goal
Exclusive Listing
We can get you the maximum return on your investment by running an exclusive listing on our website, our eBay store, and through bulk email to thousands of end-user manufacturing facilities throughout the midwest. This gives you the following advantages:You retain ownership of the machine(s) until sold:We advertise and market your machine to end users who are ready and willing to pay retail (fair market value); you do not pay anything up front for this service.Additionally, we market to other dealers who might have customers already looking for the machine(s), which they can have emailed or faxed to them as well.We offer potential customers the convenience of detailed photos and descriptions of the machine(s), which they can have emailed or faxed to them as well.Our established presence in the used machinery marketplace lets customers know that we have knowledge of the machines we are selling for you and that we are able to promptly and professionally handle all inquires about your machine(s).
Consignment
If you need to get the machine(s) out of your facilities as soon as possible, but do not want to settle for selling them to a dealer at wholesale cost, we can store your machine rent-free at our facility until it is sold. This gives you all of the advantages of an exclusive listing, with the exception of a higher commission to be deducted at the time of the sale. Although the return would not be as much as if we sell the machine(s) from out of our facility, you would be able to get more money at the time of sale than you could ever hope to get from a dealer buying at wholesale for resale stock.
Outright Purchase
If you need to generate income from your surplus machinery as soon as possible, we are always looking for quality machines to buy for our resale inventory. Our offers will be competitive.
|
Call for a free demonstration or consultation. Or visit us on the web: www.innovatetec.com
 |
Headquarters: |
Indiana Office: |
Innovate Technologies, Inc.
761 N. 17th St., Unit #5
St. Charles, IL 60174
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
Innovate Technologies, Inc.
3830 Hanna Circle, Suite D
Indianapolis, IN 46241
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
 |
Used Wire EDM Machine1994 Charmilles Robofil 310Details:
- Charmilles CNC Control
- Auto Wire Threading
- 14″ Color Graphics Monitor
- Remote Hand Pendant
- Filtration System
Currently Under Power – Ready For Inspection
Price: $20,000 USD – OBO
This used wire EDM machine is in good condition. These machines are in demand, so this one won’t last long.
Call today for more information:
877-250-1770
|
Specifications:
| Machining Stroke (X-Y-Z) |
…… |
15.7″ x 9.8″ x 15.7″ |
| Machining Stroke (U, V) |
…… |
15.7″ x 9.8″ |
| Taper Capacity |
…… |
0 to 30 Degrees |
| Maximum Workpiece Size |
…… |
33.5″ x 19.7″ x 15.7″ |
| Maximum Workpiece Weight |
…… |
2,207 lbs |
| Wire Diameter Capability |
…… |
004″ to .012″ |
| Wire Diameter Guides Included |
…… |
0.010″ |
| Approximate Overall Dimensions |
…… |
71″ L-R x 63″ F-B x 88″ H |
| Approximate Machine Weight |
…… |
5,511 lbs |
|
 |
 |
Used Sinker EDM Machine
Large Capacity – Planer Mill Conversion
CNC with Orbiting Capability
Details:
- 52” x 113” Travels
- 18” Z Travel
- 48” Open Height
- 62” Open Left to Right
- 120 Amp Xermac Generator (Service & Support Available)
- CNC Control
- Orbiting Capability
Price: $ 49,000 USD
Currently under power and ready for inspection – near St Charles, IL.
This machine will handle big jobs at a fraction of the cost of a new machine.
(A new sinker EDM machine with this capacity could cost $500,000.)
It won’t last long at this price, so call today: 877-250-1770
|
 |
Used Sinker EDM Machine
Hansvedt Model CS-10
Condition:
- Good Condition
- Currently Under Power
- Ready For Inspection
Details:
- Machine
- Table Dimensions (WxD) : 15×9″/381x229mm
- Worktank Dimensions (WxDxH) : 24x16x11″
- 610x407x280mm
- Table Travel
- X-Axis : 8″/203mm
- Y-Axis : 6″/152mm
- Ram Travel (Z-Axis) : 8″/203mm
- Platen-to-Table Distance : 10 to 18″
- 254 to 457mm
- Electrode Weight (Max.) : 75lb/34kg
- Workpiece Capacity (Max.) : 200lb/91kg
- Dielectric System
- Reservoir Capacity : 65 US gal / 225 liter
- Filter Type : Dense Pack
- Floor Space
- (WxDxH) : 70x60x84″
- 1778x1524x2134mm
- Net Weight : 1,850lb/839 kg
- Power Supply
- Peak Current : 32 amp
- Electrode Wear : <1%
- Input Power : 195 to 250 VAC
- 60 Hz, 1 phase
Price: Best Offer
This is a great choice if you are in the market for a reliable used sinker EDM machine.
Give us a call today: 877-250-1770
|
|
|
| 6 Days and counting… Need tickets? Give us a call: 877-250-1770 |
|
See All The New Innovations From Mitsubishi
|
We’re proud to be the exclusive dealer for Mitsubishi EDM and Waterjet in Illinois and Indiana.
We’ve helped hundreds of companies to improve their productivity with Mitsubishi equipment.
In fact, nearly a third of all EDM users choose systems from Mitsubishi.
|
|
Now is the time to give your team the tools they need to compete!
Mitsubishi wants to help you make it happen with Special IMTS Financing.
Give us a call today for the details! 877-250-1770
Here is the full line up of machines that will be on display at the show:
WIRE
- MV1200R Advance Plus
- MV2400R Advance w B-Axis
- MD+Pro III w B-Axis
- NA1200 w Micro High Speed Spinning Axis
SINKER
HOLE POPPER
|
WATERJET
- MWX3 612 w Bevel – 90K Pump
- MWX4 612 w Bevel – 90K Pump
MILLING
- MCV1000
- SV1100
- DM800 or 600
- TV500 w Pallet Changer
AUTOMATION
- EA12V w Robot
- Ingersoll 800 w A/B Axis
- Roku 658 HSM w Robot
|
Learn More About The Machines – Download Brochures At innovatetec.com
We’re Also In A New Location This Year
North Hall – Booth N-6825
| Join Us at IMTS 2012 in Chicago – September 10 – 15, 2012 |
|
 |
Mitsubishi EDM
North Hall Booth # N-6825
Mitsubishi EDM & Waterjet
MC Milling VMCs
Roku Roku High Speed Milling Machines |
Contact us if you need tickets for IMTS for you and your team.
We can help with your trip to Chicago.
Let’s plan a time to meet at the show
The Triple Diamond Logo Means VALUE!
- Exceptional Performance
- Backed By Mitsubishi’s World Class Service & Support
- Competitive In-House Financing
Call for a free demonstration or consultation – or visit us on the web: www.innovatetec.com
| Headquarters: |
Indiana Office: |
Innovate Technologies, Inc.
761 N. 17th St., Unit #5
St. Charles, IL 60174
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
Innovate Technologies, Inc.
3830 Hanna Circle, Suite D
Indianapolis, IN 46241
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
The Countdown Has Begun, Only 16 Days Until IMTS 2012…
See The New VMCs From Mitshubishi At IMTS
On display will be four of the new MC Milling Diamond Cut general purpose milling vertical machining centers.
Machines to be showcased include the drill/tap TV500 with pallet changer, the ultra-rigid DM series for die/mold applications, the heavy-duty boxway SV series for large parts, and the general purpose MCV series.
Rounding out the MC Milling line, the high-speed, high-precision Roku-Roku HC-658 with robot will be on display, demonstrating superior repeatability and positioning accuracy.
Learn More About The New VMCs From Mitsubishi – Download Brochures
Mitsubishi’s innovations give you the edge you need to beat the competition…
Give us a call today, and let us explain how!
|
|
|
The Triple Diamond Logo Means VALUE!
- Exceptional Performance
- Backed By Mitsubishi’s World Class Service & Support
- Competitive In-House Financing
|
|
Call for a free demonstration or consultation – or visit us on the web: www.innovatetec.com
Join Us at IMTS 2012 in Chicago - September 10 – 15, 2012
|
|
Mitsubishi EDM Booth # N-6825
See the new VMCs from Mitsubishi
Along with Roku Roku High Speed Milling
And Mitsubishi EDM & Waterjet
|
Contact us if you need tickets for IMTS for you and your team.
We can help with your trip to Chicago.
Let’s plan a time to meet at the show
| Headquarters: |
Indiana Office: |
Innovate Technologies, Inc.
761 N. 17th St., Unit #5
St. Charles, IL 60174
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
Innovate Technologies, Inc.
3830 Hanna Circle, Suite D
Indianapolis, IN 46241
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
The Olympic Games Have Ended, But It’s Game On For American Manufacturers…
Mitsubishi Waterjet Machines
The Waterjet GAME CHANGER!
The Fastest Cutting & Most Accurate Waterjets…Let Us Prove It!
- KMT 90,000 psi Intensifier Pump
- Mitsubishi 730 Series Control
- True Nesting Software Included
Learn More About The Mitsubishi Waterjet Machines – Download Brochures
|
|
|
|
|
The Triple Diamond Logo Means VALUE!
- Exceptional Performance
- Backed By Mitsubishi’s World Class Service & Support
- Competitive In-House Financing
|
|
|
These waterjet machines will give you the edge you need to beat the competition…
Give us a call today, and let us explain how!
|
|
Call for a free demonstration or consultation,
Or visit us on the web: www.innovatetec.com
Join Us at IMTS 2012 in Chicago - September 10 – 15, 2012
|
|
Mitsubishi EDM Booth # N-6825
See the new Mitsubishi Waterjets
Along With Mitsubishi EDM, MC Milling VMCs
and Roku Roku High Speed Milling
|
Contact us if you need tickets for IMTS for you and your team.
We can help with your trip to Chicago.
Let’s plan a time to meet at the show
| Headquarters: |
Indiana Office: |
Innovate Technologies, Inc.
761 N. 17th St., Unit #5
St. Charles, IL 60174
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
Innovate Technologies, Inc.
3830 Hanna Circle, Suite D
Indianapolis, IN 46241
(630) 587-4220 – Tel
(630) 587-4219 – Fax
www.innovatetec.com |
|
|
